FEATURES
-
Push button air/hydraulic pump provides
safe, quick lifting.
-
Adjustable arms and lifting pads safely
support the vehicle on the bridge.
-
Universal mounting brackets adjust to a lift
rail opening of 48-3/4".The universal
mounting brackets can be installed in the
bridge right side up or up side down for a
total of eight different height locations
when securing the adapters to the bracket.
Adapter kits are sold separately.
-
Flat-end and hook-end adapter brackets are
equipped with spring-loaded roller bearings
for smooth maneuverability of bridge on lift
rails.
-
Mechanical stop prevents accidental lowering
of bridge.
-
Lowering is accomplished with one hand on
the release lever and the other hand
releasing the mechanical stop.
-
Equipped with rubber faced saddle for
differential lifting.
NOTE: Adapter bracket kits must be ordered to
adapt the universal mounting brackets to the
above ground lift's rails. The majority of
applications will require model 79326A flat-end
or model 79327A hook-end adapter kits. Other
kits are available upon request.
MODEL
79328B
9"
EXTENSION ADAPTERS
For use with light duty
trucks, vans and 4x4's. The adapter increases
the "I" dimension on the specification chart
from 1-3/8" to 10-3/8". Weight: 19 lbs. per pair
MODEL 79326A
FLAT-END MOUNTING BRACKETS
Flat-end
mounting brackets enable the Rolling Lift Bridge
to roll on flat surfaces. Weight: 12 lbs. per
set of 4.
MODEL 79327A
HOOK-END MOUNTING BRACKETS
Hook-end
mounting brackets enable the Rolling Lift Bridge
to roll on the rails of the lift. Weight: 12
lbs. per set of 4.
